Filter
Top Products
8
III.) Pump Preparation
*AR Pumps Only
A.) Remove the shipping plug from the oil fill hole.
B.) Screw the vented dipstick into oil fill hole.
C.) Check oil level in the pump. Make sure it is 1/2 way
up the sight glass .
AR PUMPS
**Cat Pumps Only
A.)Remove shipping tape from oil fill cap
B.)Make sure the oil is 1/2 way up oil sight glass.
CAT
PUMPS
Quantities Of Fluid
Pump Type of Fluid QTY
AR XTV SAE 30* 8.0oz (0.24L)
AR XMV SAE 30* 14.0oz (0.41L)
Cat 2SFX SAE 30** 11.83oz (0.35L)
*SAE Non-Detergent Oil (order Pump Oil Item# 4043)
**SAE Non-Detergent (order Cat Pump Oil Item# 22158)
IV.) Chemical Injector Preparation
A.) Push clear hose onto chemical strainer.
B.) Push other end of clear hose onto chemical injector
Sight
Glass
Oil Fill
Hole
Sight Glass
Oil Fill Hole