Filter
Top Products
TRANSMISSION.
EffICIENT, EASY
TO USE AND VERSATILE.
THE RIGHT SPEED fOR THE jOB
The Synchro Command™ transmission
has three ranges of four speeds plus two
creeper ranges.
The transmission design enables the
operator to select a working ratio and then
choose the right speed to match the job.
If conditions change, the overlap between
the speeds enables a different gear to be
selected within the same ratio. Up to eight
gears can be selected in the main working
speeds between 4 - 12kph.
Developed around proven transmission, hydraulic and axle
modules, TDD tractors offer proven dependability.
Matched to modern manufacturing, all components benefit from
exacting quality control at each production stage. This ensures
every part of a TDD tractor has to pass stringent tests before it is
built into the tractor.
Specified with a Synchro Shuttle™ transmission with matched
forward and reverse speeds and additional creep speeds. Low
power loss through the transmission is a key New Holland
feature. This is achieved by careful design, reducing the number
of gears that are engaged to produce a given operating speed.
For durability, the constant mesh gears are helically cut. This
feature helps reduce noise and vibration and is a key feature in
ensuring maximum durability. The standard transmission features
at 30kph transport ratio. Where local conditions allow, a 40kph
transmission is available (Standard with 4WD Cab Units).
8 9
TDD Plus