Filter
Top Products
AUTO COMMAND™ TRANSMISSION16 17
INNOVATIVE AUTO COMMAND™ TRANSMISSION
OFFERS ADVANCED NEW HOLLAND FEATURES
Designed and built by New Holland, the T7 Auto Command is available from the T7.170 to the T7.270.
This new generation of CVT transmissions benefits from multi direct drive points offering 100% mechanical
efficiency, plus advanced double clutch control. It is the smoothest and most productive CVT available.
A SPEED FOR EVERY NEED
Auto Command allows the operator to set a target
speed of between 20m/hr right through to 50km/hr.
No steps. No range changes. Just seamless speed
to match your every need.
• Force based movement enables the operator to change
speed and direction. On the ICP there is a switch to alter
the response of the speed change.
kph
0 5 10 15 20 25 30 35 40 45 50
Speed diagram
forward
1
2
3
MAKING THE MOST OF AVAILABLE TORQUE
New Holland has developed its Auto Command™
transmissions so they can exploit the low running
speed, high torque New Holland engines. With 50kph
ECO, the engine can run at a fuel efficient 1550 rpm.
Engine speed at 50 kph (rpm)
• 4 DRIVING MODES TO SUIT YOUR DRIVING STYLE
- Auto Mode. Select the desired target
speed and Auto Command will match
the engine and transmission to maintain it.
- Cruise Mode. Once a desired operating
speed has been achieved, Cruise Mode
allows the operator to set the transmission to
maintain the speed for economy and productivity.
- Manual Mode. Allows the operator to set
the required engine and forward speed.
- PTO mode. As soon as the PTO is engaged,
Auto Command will operate to guarantee
a constant engine speed.
• Target speed adjustment – set a target speed to match
your exact needs. Perfect when moving between fields
or when crop yields have altered.
• Target speed selection – allows you
to change between three target speeds
1500
1400
1300
1600
1550
1650
1700
1700
New T7 Competitor A Competitor B
* only T7.220 - T.270 models
UP TO 10% ENGINE
SPEED REDUCTION
FOR GREATER FUEL
ECONOMY*
NH_T7_Brochure.qxd:NH_T7_Brochure 23/5/11 5:26 PM Page 16