Filter
Top Products
SPECIALIST TRACTORS FOR SPECIALIST NEEDS
The modular build of T4000F/N/V tractors enables New Holland to offer a broad range of specifications that exactly matches
your specialised need. The standard hydraulic flow of all models is 48.6 Lpm. Need more flow? Specify the Megaflow pump,
and output can be increased to 63.8 Lpm.*
T4000F/N/V. Factory built to your specification.
* Standard for the Australian market.
PTO AND HYDRAULICS10 11
DIRECT OUTPUT, NO LOSS OF POWER
Engaged via a servo assisted control, the rear pto on
T4000F/N/V tractors has a direct driveline to minimise
power loss. Maximum engine power is directed to the
PTO for optimum efficiency and performance. A
choice of Ground Speed/540/540E/1000 PTO speeds
are available.
HYDRAULIC LINKAGE SETTINGS
Hydraulic stabilisers can be specified to allow the
attachment to be offset to either side of the tractor.
The stabilisers can be set in a fixed or float position by
the push of a button. A levelling ram can also be
specified for the right lower link arm. Both systems
have a dedicated hydraulic supply.
DIRECT PTO POWER OUTPUT