Filter
Top Products
In full control of the crop delivery
The operator has the possibility to
direct the crop flow to any practical
direction: a full 210 degrees rotation
ability adds to the operating comfort.
Full protection.
New Holland MetaLoc™ system
For a quick locating and easy removal
of a detected metal object, the MetaLoc™
system shows, on the IntelliView™ III
monitor, in which section of the feed rolls
the detection has been registered. This
location indication is even more important
on the FR9000 models because of the
wide chopping unit. The HydroLoc™
feedroll drive system also ensures
an instant response in case of metal
detection. The power reverse system on
the pick-up automatically lifts the wind-
guard and changes the angle of the
retractable fingers, for a positive rejecting
of the crop.
Automatic functions further increase operator efficiency
A considerable reduction for the need of the operator to intervene adds
to operator convenience and efficiency. Automated functions include
the synchronisation of the pick-up reel speed with the ground speed and
the synchronisation of the auger speed with the feeder speed. Automatic
headland functions include lifting the crop attachment and lowering it back
to working height and link the header position to the running of the feeder.
Also the spout set points, positioning the spout under the same angle when
working with the trailer to the right or to the left, add to the ease of operation.
These and other automated functions and recorded machine settings increase
operator efficiency and reduce down time.