Filter
Top Products
New Holland BB9000 Series
Large Square Baler Specifications
BB9060 BB9080
Page 2of 2
MODEL BB9060 BB9060 BB9060 BB9080 BB9080
T
YPE STANDARD PACKER CUTTER ROTOR CUTTER STANDARD ROTOR CUTTER
BALE DENSITY SYSTEM
Proportional 3-way control Monitor controlled Monitor controlled Monitor controlled Monitor controlled Monitor controlled
Manual override Standard Standard Standard Standard Standard
ELECTRONIC CONTROL SYSTEM
ISO 11783 connection ready Standard Standard Standard Standard Standard
InfoView™ II monitor Standard Standard Standard Standard Standard
IntelliView™ III touch screen
color monitor Optional Optional Optional Optional Optional
TIRES
Single axle 600/55X22.5, 16 PR 600/55X22.5, 16 PR 600/55X22.5, 16 PR 710/40RX22.5 710/40RX22.5
Tandem axle 500/50X17, 14 PR 500/50X17, 14 PR 500/50X17, 14 PR 500/50X17, 14 PR 500/50X17, 14 PR
BALER DIMENSIONS
Length chute closed, in. (mm) 284.6 (7230) 284.6 (7230) 284.6 (7230) 284.6 (7230) 284.6 (7230)
Width (single axle 600/55X22.5 tires),
in. (mm) 101.6 (2580) 101.6 (2580) 101.6 (2580) 101.6 (2580) 101.6 (2580)
Width (tandem axle 500/50X17 tires),
in. (mm) 99.2 (2520) 99.2 (2520) 99.2 (2520) 99.2 (2520) 99.2 (2520)
Height (single axle), in. (mm) 122 (3100) 122 (3100) 122 (3100) 122 (3100) 122 (3100)
Height (tandem axle), in. (mm) 120 (3050) 120 (3050) 120 (3050) 120 (3050) 120 (3050)
Weight (single axle), lbs. (kg) 15,035 (6820) 15,807 (7170) 17,240 (7820) 17,019 (7720) 19,466 (8830)
Weight (tandem axle), lbs. (kg) 16,358 (7420) 17,129 (7770) 18,563 (8420) 18,342 (8320) 20,789 (9430)
New Holland
Bale Accumulator Specifications
AC3104 AC4104
MODEL AC3104 AC4104
Capacity 3 Bales 3 Bales
Bale size, in. (mm) 32.5 (826) wide bales 48 (1219) wide bales
Eject Manual or Auto Manual or Auto
Width, in. (mm) 116 (2946) 162 (4115)
Length, in. (mm) 110 (2794) 110 (2794)
Height*, in. (mm) 32 (813) 32 (813)
Weight, lb. (kg) 2,200 (998) 2,800 (1270)
Hydraulic req, gpm (lpm) 10 (37.8) continuous pressure 10 (37.8) continuous pressure
Silage bales Yes Yes
*with 26x12x12 tires
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
© 2008 CNH America LLC
New Holland is aregistered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).