New Holland
Rolabar Rake Specifications
216 252
Page 2 of 2
MODEL 216 UNITIZED RAKE
O
verall height, ft. in. (mm) 5'4" (1626)
Overall width (transport), ft. (mm) 10 (3045)
Overall length (transport), ft. in. (mm) 22'1" (6730)
Weight, approximate, lbs. (kg) 3005 (1363)
Raking width
-each basket, ft. in. (mm) 10'6" (3198)
-maximum, both baskets, ft. (mm) Up to 27 (8223)
Tire sizes 11L x 15 rib implement
Operating speed, mph (kph) 2 to 10 (3 to 16)
Transport speed, mph (kph) 20 (32)
Main frame Tubular steel construction
Basket One-piece, welded construction
Tines Rubber mounted, 220 standard, 340 optional
Tine bar bearings Double ball
Tine ground clearance, in. (mm) 8 to 11 (203 to 279)
Tractor requirement 9 gpm hydraulic flow with 2000 psi relief, four remote outlets,double circuit
OPTIONS:
Front gauge wheel kit
Rear gauge wheel kit
High-density rubber 120 tine package
Safety tow chain bundle
Safety chain hardware kit
RAKE HITCHES
MODEL 252 PIVOT-TONGUE RAKE HITCH
Weight, lbs. (kg) 735 (333) with wheels
Length, ft. in. (mm) 17'5" (5305)
Maximum operating width
(with two 9 1/2-foot rakes), ft. (mm) 24 (7310)
Transport width, ft. in. (mm) 8'11" (2716)
Hitch Clevis type
Frame Rectangular steel tubing
Rake Models Two “256” rakes
Two “258” rakes
One “258” and one “260” rake
Ground or hydraulic drive
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).