Filter
Top Products
6
ASSEMBLYASSEMBLY
NOTE: Assembly of this heater requires
basic mechanical skills. Proper assembly
is the responsibility of the installer.
Place the post on the top of the gas cylinder
housing. Fasten the post to the gas cylinder
housing using the four (4 pcs)
Step 1
M8 35mm Bolts ,
8mm Lock Washer ,
Nuts for M8 35mm Bolts .
5
12
10
X
X
6
Slide the gas hose with the attached
Head assembly through the top of the post and
down through the hole in the top of the gas
cylinder housing. Screw the combustion assembly on
to the post, and tighten securely.
3
4
5
Step 2
8
Step 1 ----
Attach Post to Gas Cylinder Housing
Step 2 ----
Attach Head Assembly to Post