Filter
Top Products
ASSEMBLY
13
F–040406L
HOW TO ASSEMBLE THE CONTROLS TO THE HANDLE
Two types of handles are shown in Figure 4.
The engine on your model will determine
which type of handle is on your model. Type A
is for models with Briggs & Stratton engines.
Type B is for models with Tecumseh engines.
Note: On models with Briggs & Stratton en-
gines, make sure the stop lever bracket is
on the left side of the handle. On models
with Tecumseh engine, make sure the stop
lever bracket is on the right side of the han-
dle.
1. Mount the ends of the engine stop lever
into the top holes of the handle.
2. Attach the the stop cable to the handle as
shown in Figure 4.
Stop Cable
Handle
Engine
Stop Lever
Figure 4
Stop Lever
Bracket
Stop Cable
Handle
Engine
Stop Lever
Stop Lever
Bracket
TYPE A
Models With
Briggs Engines
TYPE B
Models With
Tecumseh Engines
Cable
Fastener
1101352
Cable
Fastener
1101352