Filter
Top Products
OPERATION
9
F–041105C
KNOW YOUR EDGER
READ THE OWNER’S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
Edger. To familiarize yourself with the location of the controls, compare the illustrations with
your Edger. Save this manual for future reference.
Depth Control Lever
Engine Stop
Lever
Fuel Tank
Cap
Blade Guard
Recoil
Starter
Handle
Control Rod
Blade Guide
Blade
Figure 6
Primer Button
Oil Fill Cap
Throttle Control
Air Filter
Index Lever
(Located On Left
Side Of Edger)
Throttle Control – The engine is set to
run at full speed. The throttle control has
only two positions, RUN and STOP.
Primer Button – Injects fuel directly into
the carburetor for faster starts.
Recoil Starter Handle – The engine is
equipped with an easy pull recoil starter.
Index Lever – Set bevel cut.
Depth Control Lever – Controls depth of
cut.
Blade Guard – Use to prevent stones and
debris from being thrown at the operator.
Engine Stop Lever – Must be engaged
to allow the engine to start and run.
Release
to stop the engine.