Filter
Top Products
PAGE 28 — DCA-220SSVU— OPERATION AND PARTS MANUAL — REV. #1 (01/20/06)
DCA-220SSVU — GENERATOR OUTPUTS
Generator Amperage
Tables 8 and 9 describe the generator’s current output capa-
bility for both 1Ø-phase and 3Ø phase applications.
elbaliavAsegatloV.7elbaT
esahPeerhT
)elbahctiwS(
V802V022V042V614V044V084
esahPelgniS
)elbahctiwS(
V021V721V931V042V452V772
Generator Output Voltages
A wide range of voltages are available to supply voltage for
many different applications. Voltages are selected by apply-
ing jumpers (6) to the
voltage change-over board
(Figure 15).
To obtain some of the voltages as listed in Table 6 (see
below) will require a fine adjustment using the
voltage regu-
lator
(VR)
control knob
located on the control panel.
Voltage Change-Over Board
The
voltage change-over board
(Figure 15) is located on
the control box, behind the generator control panel. This
board has been provided for ease of voltage selection.
CAUTION - CHANGING VOLTAGES
NEVER attempt to place jumper plates on the
voltage
change-over board
while the generator is in operation.
There exist the possibility of
electrocution, electrical
shock or burn, which can cause severe bodily harm
or even death
!
sgnitaRerepmArotareneG.9elbaT
⎯⎯
⎯
⎯⎯
3
∅∅
∅
∅∅
WKV042V084
028442
046984
0644127
0829169
001042021
021882441
041733861
061583291
081334612
002184142
022925462
Figure 15. Voltage Change-Over Board
sgnitaRerepmArotareneG.8elbaT
⎯⎯
⎯
⎯⎯
1
∅∅
∅
∅∅
WkV021V931V042V772V084
614483229111
6355168873452
656644313327693
670122815012835
6966203233151176
61122387216193108
63187362398136149
651334473612781801
)
xaM(6716.8842243.442112221
rotarenegehttnerrucfotnuomamumixamehttcelefersnoitaluclacesehT
rotareneglatotehtn
iatbooT.riaplanimrettuptuohcaetaedivorpnac
.3ybylpitlumegarepma
spma684,1=3XriaplanimrettuptuorepV021@s
pma6.884:1elpmaxE
spma337=3XriaplanimrettuptuorepV042@spma3.442:2elpmaxE