Filter
Top Products
PAGE 24 — DCA-15SPXU4— OPERATION MANUAL — REV. #0 (03/31/11)
Figure 11. Connecting Loads
Connecting Loads
Loads can be connected to the generator by the
Ouput
Terminal Lugs
or the convenience receptacles (Figure 11).
Make sure to read the operation manual before attempting
to connect a load to the generator.
To protect the output terminals from overload, a
3-pole, 70A
main
circuit breaker is provided. Make sure to
switch ALL circuit breakers to the OFF position prior to
starting the engine.
DCA-15SPXU4 — OUTPUT TERMINAL PANEL FAMILIARIZATION