Filter
Top Products
To Begin Troweling
1. To begin troweling, push the throttle lever (Figure 28) forward
to the "RUN" position.
Figure 28. Throttle Lever (Run)
Concrete Finishing Techniques
The following steps are intended as a basic guide to machine
operation, and are not to be considered a complete guide to
concrete finishing. We suggest that all operators (experienced
and novice) read “Slabs on Grade” published by the
American Concrete Institute, Detroit, Michigan. Read the
“Training” section of this manual for more information.
To pitch the blades upwards using the "Standard" handle,
(Figure 29) simply turn the star-wheel clockwise. Turning the
star wheel counter clockwise will cause the blades to lay flat.
Figure 29. Blade Pitch Star Wheel
THROTTLE
LEVER
RUN
INCREASE
BLADE PITCH
(CW)
DECREASE
BLADE PITCH
(CCW)
BLADE PITCH
STAR WHEEL
OPERATION
To pitch the blades upwards using the "Quick Pitch™" handle,
(Figure 30) simply pull the T-handle backwards while
squeezing the trigger. Pushing the T-handle forward will cause
the blades to lay flat.
Figure 30. Blade Pitch T-Handle
T-HANDLE
TRIGGER
(SQUEEZE)
NO PITCH
(BLADES FLA
T)
BLADES PITCHED
UPWARDS FLAT