5
•Use extreme caution when cutting small sized brush
and sapling, as slender material may catch the saw
chain and be whipped toward you or pull you off
balance. Do not operate a chain saw in a tree unless
you are specifically trained to do so. When cutting a
limb that is under tension, be alert for spring back so
that you will not be struck when the tension in the
wood fibers is released. Do not expose the chain saw
to rain. Do not use the chain saw in damp or wet
locations. Do not use the chain saw in the presence of
flammable liquids or gases.
• All chain saw service, other than the items listed in the
user manual safety and maintenance instructions,
should be performed by competent chain saw
personnel. Do not attempt to repair it yourself; there
are no user serviceable parts inside.
• When not in use, chain saws should be stored out of
the reach of children, in a dry, high or locked-up place.
When storing saw, use a scabbard or carrying case.
• The chain saw will do a better and safer job when
used at the rate for which it was intended.
• Use the right tool. Cut wood only. Do not use the chain
saw for purposes for which it was not intended. For
example, do not use the chain saw for cutting plastic,
masonry, or non-building materials.
• Use devices, such as low-kickback chain, guide bar
nose guards, chain brakes and special guide bars,
which reduce the risks associated with kickback.
• There are no other replacement components for
achieving kickback protection in accordance with CSA
Z62.3.
• Do not operate a chain saw that is damaged,
improperly adjusted, or not completely and securely
assembled. Be sure that the saw chain stops moving
when the trigger is released.
• Do not attempt operations beyond your capacity or
experience.
• Never remove, modify or make inoperative any safety
device furnished with your unit.
• This saw is classified by CSA as a Class 2C saw. It is
intended for infrequent use by homeowner’s, cottagers
and campers, and for such general applications such
as clearing, pruning, cutting firewood, etc. It is not
intended for prolonged use. If the intended use
involves prolonged periods of operation, this may
cause circulatory problems in the user’s hands due to
vibration. It may be appropriate to use a saw having an
anti-vibration feature.
• Safety clothing required by your safety organizations,
government regulations, or your employer should be
used; otherwise, snug fitting clothing, safety footwear,
and hand and ear protection should be worn.
Low-kickback saw chain is chain that has met the
kickback performance requirements of ANSI B175.1-
1991 and is in accordance with CSA Z62.3. Do not use
other replacement chain unless it has met these
requirements for your specific model.
• Do not use any other cutting attachment or
accessories. Use only original equipment
manufacturer replacement parts and accessories,
which are designed specifically to enhance the
performance and maximize the safe operation of our
products. Failure to do so may cause poor
performance and possible injury. Use only the chain
and bar supplied with this product. Do not use any
other cutting attachment. Use of such attachments will
void your factory warranty and could result in serious
bodily injury.
•Never touch the chain or attempt to service the saw
while the engine is running. Make sure all moving parts
have stopped. Allow the chain saw to cool, as the
chain can be hot.
•Check the bar and chain at frequent intervals for
proper adjustment. Make sure the bar and chain are
properly tightened and sharpened. Visually inspect for
damage. Repair any damage before restarting or
operating the chain saw.
• Do not cut near electrical cables or power lines.
• Do not use the pole saw to fell a tree. Use a standard
chain saw for this application.
MAINTENANCE AND STORAGE
• Allow the unit to cool before storing or transporting.
Be sure to secure the unit while transporting.
• Store the unit in a locked up and dry or high and dry
place to prevent unauthorized use or damage, out of
the reach of children.
• Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean after each use.
• Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them these instructions.
• Only qualified personnel should perform any repairs
or maintenance procedures that are not described
in this manual.
SAVE THESE
INSTRUCTIONS
RULES FOR SAFE OPERATION