Filter
Top Products
MAINTENANCE AND REPAIR INSTRUCTIONS
11
SNOW THROWER ADD-ON
Unit Weight (Add-On only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2 lbs. (4.17 kg)
Snow Depth (maximum) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-inches (.152 meters)
Cleared Path Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-inches (.305 meters)
STORAGE
• Check unit before storage to be sure the equipment is
in safe working condition.
• Remove the residue ice or snow from the rotor by
briefly running the unit out of the snow.
• Stop the engine or motor.
• Store the snow thrower indoors, in a dry and locked
place, out of the reach of children.
• Maintain or replace safety and instruction labels, as
necessary.
For gas powerhead units:
• Allow the unit to cool before storing in any enclosure.
• Drain fuel from unit. Never store the unit with fuel in the
fuel tank inside a building where ignition sources are
present such as hot water and space heaters, clothes
dryers, etc.
TRANSPORTING
• Allow the unit to cool before transporting.
• Secure the unit while transporting.
For gas powerhead units:
• Drain fuel from unit.
• Tighten fuel cap before transporting.
SPECIFICATIONS
ACCESSORIES/REPLACEMENT PARTS
Shoulder Strap . . . . . . . . . . . . . . . . . . . . . . . . . . .682075
Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .731-2557
Drive Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .754-0633
Flange Lock Nut . . . . . . . . . . . . . . . . . . . . . . . .712-3004A
Use only original MTD replacement parts.