MTD 769-01276A Snow Blower User Manual


 
23
Styles H & K
NOTE: Snow thrower features and components vary by model. NOT all parts listed above and pictured on the previous page
are standard equipment.
REF.
NO.
PART
NO. DESCRIPTION
1 631-04125 Panel Assembly, Handle, H-Style*
(Inc. Ref. 47)
631-04128 Panel Assembly, Handle, K-Style*
(Inc. Ref. 47)
2 631-04133 Handle Assembly, Clutch Lock, LH
(Inc. Ref. 48)
3 631-04134 Handle Assembly, Clutch Lock, RH
(Inc. Ref. 48)
4 684-04105 Handle Assembly, Engagement, LH
5 684-04106 Handle Assembly, Engagement, RH
6 710-04326 Screw, #8-16 x.50
7 710-04354 Screw, 1/4-20 x.375
8 710-1026 Screw, Self-tapping, 1/4-20 x 1.750
9 710-1233 Screw, Machine, #10-24 x 1.375
10 711-04287 Rod, Pivot
11 711-0677 Ferrule, 5/16-18 x.312
12 712-04064 Nut, Flange Lock, Nylon, 1/4-20
13 712-04081A Nut, Shoulder, Hex, 1/4-20,
14 714-0104 Pin, Cotter,.072 Dia. x 1.13
15a 720-0274 Grip, 1.0 ID x 5.0
15b 725-1757† Heated Grip
16 720-04039 Knob, Shift
17 725-04213 Lamp
18a 725-04214 Harness, w/o Heated Grips
18b 725-04216A† Harness, Heated Grips
19 725-1649 Socket, Lamp
20 726-0470† Tie, Cable, 19 x 8.39”, Tree Mount
21 731-04894 Plate, Lock
22 731-04896 Cam, Clutch Lock
23 732-0193 Spring, Compression,.39 x.60 x.88
24 732-04219 Spring, Clutch, Lock
25 732-04238 Spring, Torsion, 0.8156 ID x.3038
26 735-0199A Bumper, Rubber,.62 OD x.22
27 736-0262 Washer, Flat,.385 x.870 x.092
28 738-04122 Screw, Shoulder,.437 x 1.345, 1/4-20
29 738-04125 Screw, Shoulder,.374 Dia. x 1.05
30 746-0778 Z-Fitting, Cable
31 747-04284 Rod, Shift,.312 x 9.0 Upper
32 750-04314 Connector Sleeve, Shift Rod
33 790-00130 Lever, Shift
34 790-00140 Bracket, Panel
35 710-0449 Screw, Carriage, 5/16-18, 2.25, Gr5
36 710-0726 Screw, 5/16-12, 0.750
37 720-0284 Wing Knob, 5/16-18
38 736-0451 Washer, Saddle, 320 x.93 x.060
39 749-04138 Handle, Lower, Snow
40 749-04141 Handle, Upper, RH
749-04190† Handle, Upper, RH (For Heated Grips)
41 749-04142 Handle, Upper, LH
749-04191† Handle, Upper, LH (For Heated Grips)
42 712-04063 Nut, Flange Lock, Nylon, 5/16-18
43 726-0135 Nut, Speed,.3125 Dia.
44 732-04205 Spring Lever, Shift
45 736-3015 Washer, Flat,.469 x.875 x.105
46 747-04257 Shift Rod, Lower
47 731-04864 Lens
48 712-0161 Nut, Hex Lock, Nylon, #10-24, Gr2
49 684-04117†† Chute Control Assembly, 2-Way
50 790-00131†† Bracket, Joystick
51 710-04187†† Screw, 1/4-15 x.50
52 753-04862†† Kit. 2-Way Knob
53 753-04864†† Kit, Chute Control Housing
54 710-0837† Screw, #10-16 x.625
55 712-0693† Jam Nut, 15/32-32
56 716-0398† Toggle Switch Lock Ring
57 725-1756† 2 Pos., Single Throw Toggle Switch
58 736-0226† Flat Washer,.474 x.879 x.064
59 738-04135†† Shoulder Screw,.25 x.50
60 684-04104 Chute Directional Control
61 720-0201A Chute Directional Control Knob
62 726-0100 Push Cap
63 735-0234 Rubber Grommet
64 736-0185 Flat Washer,.375 x.738 x.063
65 747-04263 Eye Bolt
66 736-0463 Washer, Flat,.25 x.630 x.0515
REF.
NO.
PART
NO. DESCRIPTION
* Example of H-Style: 31AE6FHG705
* Example of K-Style: 31AE6GKG731
† If Equipped
†† K-Style