Filter
Top Products
13
4
Making
Adjustments
WARNING
Loose gravel can be picked
up and thrown by the auger,
causing injury to the operator
and bystanders and/or
damage to the snow thrower
and surrounding property.
Skid Shoes
The space between the skid shoes and the ground can
be adjusted. See Figure 6.
• For close snow removal on a smooth surface, raise
skid shoes higher on the auger housing.
• Use a middle or lower position when the area to be
cleared is uneven, such as a gravel driveway.
To adjust the skid shoes:
1. Loosen the four hex nuts (two on each side) and
carriage bolts. Move skid shoes to desired position.
2. Make certain the entire bottom surface of skid shoe is
against the ground to avoid uneven wear on the skid
shoes.
3. Retighten nuts and bolts securely.
Chute Bracket Adjustment
If the spiral at the bottom of the chute directional control
is not fully engaging with the chute assembly, the chute
bracket can be adjusted. To do so:
1. loosen the two nuts which secure the chute bracket
and reposition it slightly. See Figure 7.
2. Retighten the nuts.
Tire Pressure
Before operating, check tire pressure and reduce pres-
sure to between 15 psi and 20 psi.
If the tire pressure is not equal in both tires, the unit may
pull to one side or the other.
Figure 6
Figure 7