MTD 737-0168 Snow Blower User Manual


 
23
Styles C & D
REF.
NO.
PART
NO. DESCRIPTION
1 684-04106A Handle Ass’y, Engagement RH Black
2 684-04105A Handle Ass’y, Engagement, LH Black
3 710-0726 Screw, Self-tapping, 5/16-12, 0.750
4 710-1233 Screw, Machine, #10-24, 1.375
5 710-04164 Screw, #8-18 x .375
6 712-0161 Nut, Hex Lock, #10-24, Gr2, Nylon
7 712-04063 Nut, Flange Lock, 5/16-18, Grf, Nylon
8 712-04064 Nut, Flange Lock, 1/4-20, Grf, Nylon
9 714-0104 Pin, Cotter, .072 x 1.13
10 720-0274 Grip, 1.0 ID x 5.0
11 710-04354 Screw, 1/4-20, .375
12 711-04287 Rod, Pivot
13 631-04134 Handle, Clutch Lock, RH
14 631-04133 Handle, Clutch Lock, LH
15 732-04219 Spring, Control Lever Lock
16 731-04896 Cam, Lock
17 735-0199A Bumper, Rubber, .62 OD x .22
18 731-04894 Plate, Lock
19 747-1136 Retainer, Lens
20 738-04122 Screw, Shoulder, .437 x 1.345, 1/4-20
21 746-0778 Z Fitting, Cable
22 725-1658 Lamp, Halogen, 12V, 27W
23 725-1672 Lens Assembly, Lamp
24 725-04220 Harness, Headlight
25 747-04263 Eye Bolt, Chute Crank
26 790-00100 Panel, Handle, C-Style
790-00101 Panel, Handle (w/ Cutout), D-Style
27 684-04104 Crank Assembly, Chute
28 710-0449 Screw, Carriage, 5/16-18, 2.25, Gr5
29 712-04081A Shoulder Nut, Hex, 1/4-20
30 720-0284 Knob Assembly, Wing Nut, 5/16-18
31 720-0201A Crank Knob, 1.0 Diameter x 3.2, Black
32 726-0100 Cap, Push, 3/8 Rod
33 735-0234 Grommet, .44 ID x .94 OD x .50
34 736-0185 Washer, Flat, .375 x .738 x .063
35 736-0451 Washer, Saddle, 320 x .93 x .060
36 749-04138 Handle, Lower, Snow
37 749-04141 Handle, Upper, RH
38 749-04142 Handle, Upper, LH
39 710-0606 Screw, Hex, 1/4-20 x 1.5
40 732-04238 Spring, Torsion, .8156 x .3038
41 710-0376 Screw, 5/16-18 x 1.0
42 720-0223 Grip
43 747-04243 Lever, Shift
44 790-00099 Panel, Speed Selector (5 FW, 2 RV)
45 732-04205 Spring, Shift Lever
46 790-00156 Bracket, Shift Spacer
NOTE: Snow thrower features and components vary by model. NOT all parts listed above and pictured on the previous page
are standard equipment.