Filter
Top Products
5
Illustrated
Parts List
To order
replacement parts,
call the Customer
Service Line at
1-800-800-7310
or visit
www.mtdproducts.com
Ref.
No.
Part No. Description
1 710-04095 Hex Screw, 3/8-16, 1.00, Gr5
2 710-0514 Hex Screw, 3/8-16, 1.00, Gr5
3 710-0643 Hex Screw, 5/16-18, 1.00, Gr5
4 711-1408 Link, Drag, RH
5 711-1409A Link, Drag, LH
6 712-0214 Nut, Hex Lock, 3/8-24
7 712-04065 Nut, Flange Lock, 3/8-16, Grf
8 712-0459 Nut, Flange Lock, 7/16-20
9 712-3004A Nut, Flange Lock, 5/16-18, Gr5
10 712-0240 Nut, Jam, 7/16-20, Gr2
11 717-1550E Gear, Steering, 11/90 Ratio
12 717-1554 Gear, Pinion, Steering
13 723-0448A Ball Joint, 7/16-20, Lock
14 736-3004 Washer, Flat, .406 x .875 x .105
15 736-3084 Washer, Flat, .51 x 1.12 x .06
16 710-1260A Screw, 5/16-18, 0.750
17 738-04154 Spacer, Shoulder, .38 x 1.00 x .31
18 738-1001A Shaft, Steering, .625 OD x 24.25
19 741-0475 Plastic Bushing .380 ID
20 731-1291A Pivot Bar End Cap
21 783-0726E Pivot Bracket, Support RH
22 783-0727D Pivot Bracket, Support LH
23 783-0728B Pivot Bracket, Bar
24 631-04028 Steering Wheel
25 731-04039 Steering Wheel Cap
Ref.
No.
Part No. Description
731-04040 Steering Wheel Cap, Sprig Logo
731-04681 Steering Wheel Cap, Tine Logo
26 738-04128 Shoulder Bolt .5 x 2.38 3/8-16 42”
738-1011A Shoulder Bolt .5 x 2.23 3/8-16
27 731-05674 Hub Cap, Standard
28 736-04228 Flat Washer, .781 x 1.59
29 714-04039 Cotter Pin, 5/32 x 1.25
736-0316 Washer, Flat .78 x 1.59 x .060
30 719-04105 Cast Iron Pivot Bar
31 726-0341 Push Cap
32 638-04003A LH Axle Assembly, .750
33 638-04004A RH Axle Assembly, .750
34 714-04023 Cotter Pin, .080 x 1.5625 Internal
35 741-0660A Flange Bearing
36 731-04057A Axle End Cap, Standard
37 741-0656A Hex Flange Bearing
38 634-04086 Wheel Assembly Complete, 15x6
734-1731 Tire Only 15 x 6 x 6
634-04081 Rim Only w/ Valve Stem
39 783-04568 Frt. Deck Hang Bracket (42” Deck)
783-0720A Frt. Deck Hang Bracket (46” Deck)
40 638-04006 LH Axle Assembly, .750
41 638-04005 RH Axle Assembly, .750
42 683-0128B Pivot Bar Axle Assembly
43 711-0332 Clevis Pin, .50 x .78 lg.
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard
equipment.