Filter
Top Products
23
Models 440 Thru E450 Series
Ref. No Part No. Description
1.
712-3025 Hex Jam Nut 5/16-24
2.
736-0425 Bell Washer .325 x .930 x .045
3.
756-1042 Pulley, 3.82 x .313 x .68
4.
736-0425 Bell Washer .325 x .930 x .045
5.
712-0896 Lock Nut 1/4-28
6.
736-0406 Flat Washer .442 x 1.38 x .060
7.
782-7598 Belt Keeper
8.
741-0124 Ball Bearing
9.
721-0457 Oil Seal
10.
750-1050 Flange Spacer
11.
682-0028 Idler Bracket Assembly
12.
741-0682A Bearing Sleeve
13.
732-0849A Flat Washer .504 x .700 x.030
14.
710-0299 Hex Cap Screw 1/4-28 x 1.00
15.
736-0570 Flat Washer .865 x 1.145 x .030
16.
741-0699 Needle Bearing .438 x .625 x .500
17.
721-0325 Plug 1/4 x .437
18.
618-0300A Upper Housing
19.
721-0329 Oil Seal .500 x .687 x .094
20.
741-0673 Flange Bearing
21.
611-0105 Output Shaft
22.
736-0520 Flat Washer .504 x .700 x .030
23.
717-1492 Pinion Shaft 10T
24.
736-0314 Thrust Washer .375 x .70 x .030
25.
736-0569 Thrust Washer .388 x .625 x .062
26.
618-0299A Lower Housing
27.
741-0672 Flange Bearing .378 x .531 x .370
28.
710-1276 Hex Screw w/Washer 1/4-20 x .750
29.
618-0298A Transmission Assembly
(Includes Ref. # 1to Ref. #30)
30.
732-0708 Bearing Retainer
31.
741-0604 Bearing Sleeve .50 I.D.
32.
748-0355 Bearing Support
33.
736-0447 Wave Washer 1.5 x 1.0 x .029
34.
782-0512B RH Height Adj. Plate
35.
782-0511A LH Height Adj. Plate
36.
682-0509 Pivot Plate Assembly
37.
732-0706 RH Front Lever
38.
732-0707 LH Front Lever
39.
720-0190 Knob
40.
710-0216 Hex Cap Screw 3/8-16 x .75
41.
736-0474 Washer DD 1.5” O.D.
42.
716-0102 Snap Ring 1.0 dia.
43.
782-7551 Wheel Dust Cap
44.
717-1534 Gear 14T RH FWD
45.
717-1533 Gear 14T LH FWD
46.
634-0021A Wheel, 8x2 x 1.75
47.
731-0981A Hubcap: Gray
48.
682-0512A RH Height Adj. Complete
49.
682-0511A LH Height Adj. Complete
50.
682-0030 Cable Idler Bracket
51.
715-0221 Dowel Pin
52.
736-3013 Flat Washer 1/2 x 1.00 x .063
53.
714-0101 Cotter Pin .08 x 1.42
54.
738-1002 Screw
55.
754-0465 Belt
Ref. No Part No. Description
IMPORTANT:
For a proper working machine, use factory approved parts.
V-Belts are specially designed to engage and disengage safely. A substitute (non OEM) V-Belt can be dangerous
by not disengaging completely.