Filter
Top Products
Lift the stone-guard and attach the grass-catcher (1) cor-
rectly as shown in the drawing.
To start the engine, follow the instructions in the engine
booklet and then pull the blade brake lever (1) towards the han-
dle and give a sharp pull on the starter cable knob (2).
The lawn will look better if it is always cut to the same
height and in alternate directions.
When you have finishing mowing, release the brake lever
(1) and disconnect the spark plug cap (2).
WAIT FOR THE BLADE TO STOP before carrying out any type
of work on the machine.
3.4
3.3
3.2
3.1
3. GRASS CUTTING
1
3.1
1
2
3.2
1
2
3.3
1
2
3.4