Melissa 677-002 Landscape Lighting User Manual


  Open as PDF
of 23
 
14 15
14 15
• Chargingcapacityofthebatteryunitdependson
the amount of sunlight and is thus depending on
geographicalpositionandweather.Obviously,in
Northern Europe the solar cells do not have the
same effect as in countries with more sunshine
hours, which may affect the effectiveness of
the light. If the weather is severely cloudy or on
short winter days, recharging may sometimes be
insufcientfornormaluseofthelight.
INSTALLATION
Assembly
The appliance must be assembled before use.
Ensure that the light (7), the motion sensor (14) and
the solar cell panel (3) are all the right way round
(see the illustration).
• Attachthetwoanges
on the motion sensor
(1)overtheangeto
the light (6). Screw the
angestogetherwitha
bolt a nut.
• Attachthetwoanges
on the solar cell panel
(2)overtheangeto
the motion sensor
(13).Screwtheanges
together with a bolt a
nut.
Position
When choosing a position
for the appliance, ensure
that the solar cell panel can be angled in the
direction of the sun when the motion sensor and the
light are angled in the required direction.
• Theappliancecanbemountedonawall,postor
similar using the bracket for wall mounting (12).
o First, securely screw the bracket onto the
desired place.
o Attach the light to the bracket using the
clamping screw (5) and a nut.
• Theappliancemayalsobeplacedintheground
using the accompanying spike.
o First, join the two parts of the spike (10 and
11).
o Press the spike into the ground, where you
wish the light to be placed. Gently step
on the support spike (9) in order to secure its
position in the ground.
o Press the bracket (8) securely on to the top
of the spike.
o Attach the light to the bracket using the
clamping screw and a nut.
PREPARING THE APPLIANCE
• Anglethesolarcellpanelsothatitabsorbsas
much sunlight as possible.
• Anglethelightandthemotionsensoruntilthey
point in the required direction. Tighten the bolts
and nuts once each part has been correctly
adjusted.
• Leavethebatteriestofullychargefortwodays
before using.
USING THE APPLIANCE
• Switchontheon/offbutton(4)atthereverse
side of the solar cell panel.
• Thelightnowswitchesonwhenitisdarkand
the motion sensor registers movement. The light
comes on for approx. 30 seconds at a time.
• Thelightswitchesoffinsunlightandis
automatically recharged.
• Themotionsensorregistersmovementswithin
a distance of up to 8 m at the angles of 60º
vertical, and 120º horizontal from the position of
the motion sensor.
• Ifthelightdoesnotswitchon,possiblecauses
arethatthemotionsensorisaffectedbyarticial
lightsources,thatthebatteriesareatorthat
theon/offbuttonisattheposition“OFF”(off).
• Turntheon/offbuttontoposition“OFF”(off),if
the light is not to be used for a longer period of
time.
CLEANING
• Regularlywipethesolarcellpanel,themotion
sensor and the light with a well-wrung cloth.
• Neverusecorrosiveorabrasivecleaningagents
as they may damage the plastic parts of the
appliance.
INFORMATION ON DISPOSAL AND RECYCLING
OF THIS PRODUCT
Please note that this Adexi product is marked with
this symbol:
This means that this product must not be disposed
of together with ordinary household waste, as
electrical and electronic waste must be disposed of
separately.
 previous next