McCulloch MAC 740 Chainsaw User Manual


 
17
TECHNICAL DATA SHEET
Engine Mac 738 740 742
Cylinder volume, cm
3
38 40 42
Stroke, mm 32 32 32
Idle speed, rpm 3000 3000 3000
Recommended max.
speed, unloaded, rpm 12000 12000 12000
Power, kW 1,5 1,5 1,6
Ignition system
Manufacturer Walbro
T ype of ignition system Inductive
Spark plug Champion
Electrode gap, mm 0,5
Fuel and lubrication system
Manufacturer Zama
Carburetor type W-26B
Fuel capacity , litre 0,34
Oil pump capacity at
8500 rpm, ml/min 4 -- 8
Oil capacity, litre 0,2
T ype of oil pump Automatic
Weight
Without bar and chain, kg 5,5
BAR CHAIN
Length P itch Max
Inches I nches T ip Radius
14 0, 375 7T Oregon 91VJ
14 0, 375 7T Oregon 91VG
16 0, 375 7T Oregon 91VJ
16 0, 375 7T Oregon 91VG
Noise levels Mac738/740/742
Equivalent (see note 1) noise
pressure level at operator’s ear,
measured according to relevant
international standards, dB(A) 99,7
Equivalent (see note 1) noise
power level, measured
according to relevant
international standards, dB(A) 108,7
Vibration levels
(see note 2)
Front handle, m/s
2
5,4
Rear handle, m/s
2
5,4
Chain/bar
Standard bar length, in/cm 14/35 16/40
Recommended bar lengths,
in/cm 14/35 16/40
Usable cutt ing le ngth, in/cm 13,5/34 15,5/39
Chain speed at maximum
power, m/sec 18,5
Pitch, inches 0,375
Thickness of d rive link, m m 1,3
No. of t eeth on drive sprocket 6
Note1: Equivalentnoiselevelis,accordingto
ISO 22868, calculated as the time--weighted
energy total for noise levels under various
working conditions with the following time dis-
tribution, 1/3 idle, 1/3 full load, 1/3 full speed.
Note2: Equivalentvibrationlevelis,according
toISO22867,calculatedas thetime--weighted
energy total for vibration levels under various
working conditions with the following time dis-
tribution: 1/3 idle, 1/3 full load, 1/3 full speed.
0,375
80° 30°
0°
14/35:52
16/40:56
0,050/1,3 5/32 /4,0 0,025/0,65
91VJ
in/cm :dl
91VG
0,375
0,050/1,3
5/32 / 4,0
80°
30°
0° 0,025/0,65
14/35:52
16/40:56