McCulloch M3816 Chainsaw User Manual


 
15
TROUBLE CAUSE REMEDY
Engine will not
start orwill run
only a few
seconds after
starting.
1. Ignition switch off.
2. Engine flooded.
3. Fuel t ank empty.
4. Spark plug not f iring.
5. Fuel notreaching
carburetor.
1. Move ignition switch to ON.
2. See “Difficult Starting” in
Operation S ection.
3. Fill tank with correct fuel mixture.
4. Install new spark plug.
5. Check for dirty fuel filter; replace.
Check for kinked or split fuel line;
repair or replace.
Engine will
not idle
properly.
1. Idle speed requires
adjustment.
2. Carburetor requires
adjustment.
1. See “Carburetor Adjustment” in the
Service and Adjustments Section.
2. Contact an author ized service dealer.
1. Air filter dirty.
2. Spark plug fouled.
3. Chain brake engaged.
4. Carburetor requires
adjustment.
Engine will not
accelerate,
lacks power,
or dies under
a load.
1. Clean or replace air filter.
2. Clean or replace plug and regap.
3. Disengage chain brake.
4. Contact an authorized service dealer.
Engine
smokes
excessively.
1. Too much oil mixed w ith
gasoline.
1. Empty fuel tank and refill with
correct fuel mixture.
WARNING: Always stop unit anddisconnect spark plug beforeperforming allof
therecommendedremediesbelowexceptremedies thatrequireoperationoftheunit.
TROUBLESH OOTING TABLE
Chain moves
at idle speed.
1. Idle speed requires
adjustment.
2. Clutch requires repair.
1. See “Carburetor Adjustment” inthe
Service and Adjustments Section.
2. Contact an authorized service dealer.
DECLARA TION OF CONFORMITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna Outdoor Products Italia, S.p.A., Valmadrera, Italy . Tel:
+39--0341--203211, declarethat thechain sawmodels McCulloch M3816andM4218
CSI ---AVfromserialnumbers 2008--040(N orD)00001andonwards(theyearisclearly
statedon t herating plate,followedby the s erialnumber), complywiththerequirements
of the COUNCIL’S DIRECTIVES:
of 22 June 1998 “relating to machinery” 98/37/EC, annex IIA;
of 3 May 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable
supplements; and
of 8 May 2000 “relating to the noise emissions in the environment” in accordance with
Annex V of 2000/14/EC. The measured sound power is 108 dB(A), the guaranteed
sound power is 118 dB(A)and the netpower is 1,6 kW or 1,7 kW.
Thefollowingstandardshavebeenapplied:ISO11681--1:2004,EN/ISO12100--1:2003,
EN/ISO 12100--2:2003, and CISPR 12:2001.
Notified body, 0404 the Swedish Machinery Testing Institute, Fyrisborgsgatan 3
S--754 50 Upp sala, Sweden, has carried out EC type approval. The certificate(s) is
numbered: 404/02/901.
ThesuppliedChainSawconformswiththesamplethatunder wenttheECtypeapproval.
08--02--09
Michael S. Bounds, Director
Product Safety and Standards
Handheld Consumer Products