McCulloch 966625301 Chainsaw User Manual


 
3
Snug Fitting
Clothing
Safety Shoes
Safety Chaps
Heavy Duty
Gloves
Eye
Protection
Hearing
Protection
Safety Hat
S Keep all parts of your body away from the
chain when the engine is running.
S Keep children, bystanders, and anim als a
minimum of 30 feet (10 meters) away from
the work area. Do not allow other people
or animals to be near the chain saw when
starting or operating the chain saw.
S Do not handle or operate a chain saw when
you are fatigued, ill, or upset, o r if you have
taken alcohol, drugs, or medication. Y ou
must be in good physical condition and men-
tally alert. Chain saw work is strenuous. If
you have a ny condi tion that m ight b e aggra-
vated by strenuous work, check with your
doctor before operating a chain saw .
S Carefully planyour sawingoperation inad-
vance. Do not startcutting untilyou havea
clear work area, secure footing, and, if you
are felling trees, a planned retreat path.
OPERATE YOUR SAW SAFELY
S Do notoperate achain saw with one hand.
Serious injury to t he operator, helpers, by-
standers or any combination of these per-
sons may result from one-handed opera-
tion. A chain saw is intended for
two-handed use.
S Operate the chain saw only in a well-venti-
lated outdoor area.
S Do not operate saw from a ladder or in a
tree.
S Make sure the chain will not make contact
with any object while starting the engine.
Never try to start the saw when the guide
bar is in a cut.
S Do not put pressure on the saw a t the end
of the cut. Applying pressure can cause
you to lose control when the cut is com-
pleted.
S Stop the engine before setting the saw
down.
S Do not operate a chain saw that is dam-
aged, improperly adjusted, or not com-
pletely and securely assembled. Always
replace bar, chain, hand guard, or chain
brake i m mediately ifit becomes damaged,
broken or is otherwise removed.
S Hand carry saw only when engine is
stopped. Carry with muf fler away from body;
guide bar and chain projecting behind you;
guide bar covered with a scabbard.
MAINTAIN YOUR SAW IN GOOD
WORKING ORDER
S Have all chain saw service performed by a
qualified service dealer with the exception
of the items listed in the maintenance sec-
tionof this m anual. For example, ifimprop-
er tools are used to remove or hold the fly-
wheel whenservicing theclutch,structural
damage to the flywheel can occur and
cause the flywheel to burst.
S Make certain the saw chain stops moving
when the th rottle trigger is released. For
correction, refer to CARBURETOR AD-
JUSTMENT.
S Never modify your saw i n any way.
S Keep the handles dry , clean, and fr ee of oil
or fuel mixture.
S Keep fuel and oil caps, screws, and fas-
teners securely tightened.
S Use only McCulloch accessories and re-
placement parts as recommended.
HANDLE FUEL WITH CAUTION
S Do not smoke while handling fuel or while
operating the saw .
S Eliminate all sources of sparks or flame in
the areas where fuel is mixed o r poured.
There should beno smoking, openflames,
or work thatcould cause sparks. Allow en-
gine to cool before refueling.
S Always have fire extinguishing tools avail-
able if you should need them.
S Mix and pour fuel in an outdoor area on
bare ground; store fuel in a cool, dry, well
ventilated place; and use an approved,
marked container for all fuel purposes.
Wipe up all fuel spills before starting saw.
S Move at least 10 feet (3 meters) from fuel-
ing site before starting engine.
S Turn the engine off and let saw cool in a
non-combustible area, not on dry leaves,
straw, paper, etc. Slowly remove fuel cap
and refuel unit.
S Storethe unitand fuelin anarea wherefuel
vapors cannot reach sparks or open
flames from water heaters, electric motors
or switches, furnaces, etc.
KICKBACK
WARNING: Avoid kickback which
can result in serious injury . Kickback is the
backward,upwardor sudden forward motion
of the guide bar occurring when the saw
chain near theupper tip of theguide bar con-
tacts any object such as a log or branch, or
when the wood closes in and pinches the
saw chain inthe cut. Contacting aforeign ob-
ject in the wood can also result in loss of
chain saw control.
S Rotational Kickback can occur when the
moving chain contacts an object at the up-
per tip o f the guide bar. This contact can
cause the chain to dig into the object,
which stops the chain for an instant. The
result is a lightning fast, reverse reaction
which kicks the guide bar up and back to-
ward the operator .