Filter
Top Products
47
TP 400-2275-02-BR-SMA
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1693554 40" Mower Deck
1693560 40" Mower Deck
1693585 40" Mower Deck, S/N Range 186 and up
1693575 102 cm Mower Deck (Export), S/N Range 374 and up
40" (102 cm) Mower Deck – Height Adjustment & Rollers - (Later Models)
1 1960093 1 PAL NUT
2 1714084 1 KNOB, Spinner
3 1719901 1 CRANK, Height Adjust
4 916001 1 PIN, Spring
5 1704087 1 TRUNNION, Rod
6 1706645 1 TRUNNION, Bracket
7 118053 1 PIN, Round Head, Drilled, 3/8 x 2
8 1960074 1 CLIP, Hair Pin
9 1926149 2 CAPSCREW, Hex Head, 5/16-18 x 1 G8
10 1704083 1 ARM, Rear Adjustable
11 1930644 2 NUT, Hex Flagne Two-Way Lock, 1/2-13
12 1704116 1 BRACKET, Height of Cut
13 1917356 2 LOCKWASHER, 5/16
14 1917372 2 NUT, Hex, 5/16-18
15 1918448 1 PIN, Cotter
16 1924940 5 WASHER, 3/8
17 1705049 1 LINK & WELD PINS ASSEMBLY, Lower Lift
18 176012 1 RETAINER, Pin, Spring
19 1686686 1 SHAFT & BAR ASSEMBLY, Roller
20 1924366 15 WASHER, 5/8
21 1717675 5 ROLLER
22 1931352 1 CARRIAGE BOLT, 3/8-16 x 1-1/2
23 1719180 1 SHAFT & ARMS ASSEMBLY, 40” Rear
24 1915726 2 NUT, Hex, 5/8-11
25 1719261 1 ROD, Adjustment
26 1960170 1 WASHER, 1/2
27 1704086 1 TRUNNION, Threaded
28 1704097 1 WASHER, Detent
29 1719208 1 INDICATOR, Height of Cut
30 1919326 1 WASHER, 5/16
31 1919381 4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1
32 1665374 4 STRAP, Roller Support
33 1664847 6 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 3/4
34 1719929 2 STOP, Up Wire
35 1704082 1 NUT, Hex Adjusting
36 1916965 2 LOCKWASHER, 3/4 (Early Models)
37 1916950 2 NUT, Hex, 3/8-16 (Early Models)
38 1704073 1 BAR, Roller
39 1677507 1 SLIDE, Roller
40 1924361 1 WASHER, 1/2
41 172622 1 BOLT, Shoulder, 3/8-16
42 1960520 1 NUT, Push On
43 960641 3 NUT, Hex Lock Alum Insert, 3/8-16 (Later Models)
44 1706644 1 SPACER
45 1704077 1 STRAP, Trunnion Retainer
46 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4 G8
47 1709195 4 SPACER
48 1668513 4 ROLLER