D. Brush Replacement
Brush of the motor is replaceable. Brush has to be replaced after approximately 150 hours of use. The life of the brush depends
on the use of the unit and may last much longer. Do not replace it yourself. Contact your local authorised Mantis dealer for a
brush replacement.
c) Drive in the four screws supplied, starting with the
bottom two screws. Do not tighten screws.
d) Adjust handle location to your preference, and then
tighten all screws.
230V Power Head exploded view
5
WARNING – DANGER
USE CAUTION WHEN OPENING
THE POWER HEAD.