*Denotes optional equipment *Denotes optional equipment
5Grove TMS9000E
Specifications
Main and auxiliary hoists are powered by axial piston
motor with planetary gear and brake. “Thumb-
thumper” hoist drum rotation indicator alerts operator
of hoist movement.
Hoist line pull:
1st Layer: 10 034 kg (22,122 lb)
3rd Layer: 8466 kg (18,665 lb)
5th Layer: 7322 kg (16,142 lb)
Maximum line speed:
111 m/min (365 fpm)
Maximum permissible line pull:
7621 kg (15,700 lb) Casar Eurolift
*Optional 7784 kg (17,160 lb) 35X7 Flex-x
Rope diameter: 19 mm (3/4”)
Rope length: 225 m (738 ft) Casar Eurolift
214 m (702 ft) 35X7 Flex-x
Maximum rope storage: 300 m (984 ft)
Hoist
Carrier
Chassis
Triple box section, four-axle carrier, fabricated from high
strength, low alloy steel with towing and tie-down lugs.
Outrigger system
Four hydraulic telescoping, two-stage, double box beam
outriggers with inverted jack and integral holding valves.
Quick release type outrigger floats 610 mm (24 in)
diameter. Three position setting with fully extended,
intermediate (50%) extended and fully retracted
capacities.
Maximum outrigger pad load: 49 442 kg (109,000 lb).
Outrigger controls
Located in the superstructure cab and on either side of
carrier. Crane level indicators located at all stations.
Auto leveling standard.
Engine
Cummins QSM402 T3 six-cylinder, turbo-charged and
after cooled diesel engine, 10,8 L (661 cu in), 300 kW
(402 bhp) (gross) at 1800 rpm. Maximum torque 1898
Nm (1400 ft lb) at 1400 rpm. “Off Highway” EPA
compliant.
Equipped with engine compression brake, audio-visual
engine distress system and ether cold start aid.
Fuel tank capacity
376 L (100 gal)
Transmission
Roadranger 11 speeds forward, 3 reverse.
Steering
Front axle, single circuit, mechanical steering with
hydraulic power assist. Turning radius: 45.1 ft
Axles
Front: (2) beam-type steering axles, 2,12 m (83.4 in)
track.
Rear: (2) single reduction drive axles, 1,89 m (74.5 in)
track. Inter-axle differential locks.
Drive: 8 x 4 x 4.
S-cam, dual air split system operating on all wheels.
Spring-applied, air released parking brake acting on rear
axles. Air dryer.
ABS with traction control.
Brakes
Cummins ISM450 07 six-cylinder, turbo-charged and
after cooled diesel engine, 10,8 L (661 cu. in. ), 336 kW
(450 bhp) (gross) at 2000 rpm. Maximum torque 2102
Nm (1550 ft lb ) at 1200 rpm. “On Highway” EPA
compliant.
Equipped with engine compression brake, audio-visual
engine distress system and ether cold start aid.
*Optional engine
Superstructure continued