Filter
Top Products
Installing or removing blade
CAUTION
:
Always be sure that the battery cartridge
is
removed before installing or removing blade.
0
Insert the blade into the groove in the
blade holder until the blade
is
held by the
two
protrusions on the blade holder.
Fig.
7
CAUTION
:
Always be sure that the blade
is
installed properly before operation.
0
To
the
the
remove the blade, bend both ends of
blade up until
it
will slip
up
and over
protrusions. Then pull the blade out.
CAUTION
:
Replace the used blade before
it
is
worn
down too far, or you will have difficulty
in bending the ends up to remove
it.
If
this happens, insert
a
new blade between
the used blade and the blade holder, hold
the both blades and pull them out.
Fig.
8