Filter
Top Products
IMPORTANT
SAFETY INSTRUCTIONS
(For Gardenina Atmliances)
WARNING:
WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE
FOLLOWED TO REDUCE
THE RISK
OF
FIRE, ELECTRIC SHOCK, AND PERSONAL
INJURY, INCLUDING THE FOLLOWING:
READ
ALL
INSTRUCTIONS.
1.
Avoid Dangerous Environment
-
Don't use appliances
in
damp or wet
2.
Don't Use
In
Rain.
3.
Keep Children Away
-
All
visitors should be kept at a distance from work area.
4.
Dress Properly
-
Do not wear loose clothing or jewelry. They can be caught
in
moving parts. Use of rubber gloves and substantial footwear is recom-
mended when working outdoors. Wear protective hair covering to contain
long hair.
5.
Use Safety Glasses
-
Always use face or dust mask if operation is dusty.
6.
Use Right Appliance
-
Do not use appliance for any job except that for which
7.
Avoid Unintentional Starting
-
Don't carry plugged-in appliance with finger
8.
Don't grasp the exposed cutting blades or cutting edges when picking
up
9.
Don't Force Appliance
-
It
will do the job better and
with
less likelihood of
locations.
it
is intended.
on switch. Be sure switch is off when plugging
in.
or holding the appliance.
a risk of injury at the rate for which
it
was designed.
IO.
Don't Overreach
-
Keep proper footing and balance at all times.
11.
Stay Alert
-
Watch what you are doing. Use common sense. Do not operate
appliance when you are tired.
12.
Store Idle Appliances Indoors
-
When not
in
use, appliances should be stored
indoors
in
dry, and high or locked-up place
-
out of reach of children.
13.
Maintain Appliance With Care
-
Keep cutting edge sharp and clean for best
performance and to reduce the risk of injury. Follow instructions for lubricat-
ing and changing accessories. Inspect adapter cord periodically, and if
damaged, have
it
repaired by an authorized service facility. Inspect exten-
sion cords periodically and replace if damaged. Keep handles dry, clean, and
free from oil and grease.
14.
Check Damaged Parts
-
Before further use of the appliance, a guard or other
part that is damaged should be carefully checked to determine that
it
will
2