Makita UML03D Trimmer User Manual


 
MAINTENANCE
CAUTION
:
Always be sure that the tool
is
switched off and the battery
is
disconnected from the tool
before attempting to perform inspection or maintenance.
Blade maintenance
After operation, clean
off
the blades (both sides) with
a
stiff brush. Then wipe the blades
with
a
cloth and coat them with light machine oil.
Brush
\
Machine
oil
//'
CAUTION
:
Dirt and corrosion cause excessive blade friction and shorten the operating time per
battery charge.
If the blades become dull or slightly
damaged by contact with foreign matter,
they can usually be restored to their
original performance by sharpening with
a
file.
Removing
or
installing the blades
Seriously damaged blades or blades that
have been sharpened numerous times
should be replaced. First, disconnect the
battery from the tool. Loosen the four
screws, then remove the blades.
ile
10