Filter
Top Products
ADDITIONAL SAFETY RULES FOR CHARGER
1.
The Makita charger Model DC240 is specifically designed to charge only
the Makita batteries used
in
Model UM401D. Do not attempt to charge any
other battery
with
this charger.
2. Handle the charger carefully. Do not drop or strike
it.
3.
Never carry the charger by cord or yank
it
to disconnect from receptacle.
4.
Keep cord from heat, oil, chemicals, and sharp edges.
5.
Use
only a power source of the same voltage as indicated on the nameplate
6.
Do not attempt to use a step-up transformer, an engine generator, a DC-AC
7.
Charge mower at a room temperature between
5O
C
(41O
F)
and
40°
C
8.
Do not charge
in
place exposed to direct sunlight.
9.
Do not charge lawn mower in rain, or
in
wet locations.
of the charger when charging.
inverter or DC power receptacle.
(104O
F).
10.
Do
not allow the charger to get wet.
11. Do not charge inside a box or container of any kind.
12.
Do not charge near volatile, flammable material such as gasoline, paint, gas,
13.
Do not charge on top of paper, carpet, vinyl sheeting, cloth materials, etc.
14.
Do not allow anything to cover or clog the charger vents. Do not attempt
15.
Do not touch the charger with wet hands.
16.
Do not charge in dusty place.
17.
Stop charging immediately
if
you notice anything abnormal. Ship or take
the
charger and the mower to your nearest Makita Service Center or Distributor
for checking them.
adhesive, etc.
to insert anything into the vents.
18.
Do not attempt to disassemble or make modifications to the charger.
19.
Do not
put
any metal object or foreign matter into the charging plug. Short-
circuit
will
occur, causing a burn injury and charger breakdown.
20.
This charger incorporates parts such as switches and relays that are likely
to produce arcs or sparks; therefore, when charging mower
in
a garage or
similar location, locate the charger
in
a room or enclosure provided for this
purpose.
SAVE THESE INSTRUCTIONS.
7