Filter
Top Products
ADDITIONAL SAFETY RULES FOR CHARGER
1.
The Makita charger Model DC122
is
specifically designed to charge only
the Makita battery 121
or
122.
Do
not attempt to charge any other battery
with this charger.
2.
Handle the charger carefully. Do not drop
or
strike it.
3.
Never carry the charger by cord
or
yank it to disconnect from receptacle.
4.
Keep cord from heat,
oil,
chemicals, and sharp edges.
5.
Use
only a power source of the same voltage as indicated on the nameplate
6.
Do not attempt
to
use a step-up transformer, an engine generator
or
DC
7. Charge the battery at a room temperature
of
10°C
(5OOF)
-
4OoC
(104OF).
8.
Do not charge in place exposed to direct sunlight.
9.
Do
not allow the charger to get wet.
IO.
Do
not charge inside a box
or
container of any kind.
11.
Do not charge near volatile, flammable material such as gasoline, paint, gas,
12.
Do
not charge on top
of
paper, carpet, vinyl sheeting, cloth materials, etc.
13.
Do
not allow anything to cover
or
clog
the charger vents.
Do
not attempt
14.
Do
not charge in dusty place.
15.
Stop charging immediately if you notice anything abnormal. Ship
or
take the
charger and the battery to your nearest Makita Service Center
or
Distributor
for
checking them.
of
the charger when charging.
power receptacle.
adhesive, etc.
to insert anything into the vents.
16.
Do
not attempt to disassemble
or
make
modifications to the charger.
17.
Do
not put any metal objects
or
foreign matter into the inlet of the charger.
Short-circuit will occur, causing a burn injury and charger breakdown.
SAVE THESE INSTRUCTIONS.
Operation
Hold/support the
tool
firmly with the grip
and loop handle. Switch
ON
only when the
blades are not contacting the ground. Cut
an even swath while swinging the
tool
from right
to
left, angling the cutting head
slightly while doing
so.
When cutting grass
or
weeds next
to
walls, curbs, sidewalks
and the like, move the
tool
slowly and
smooth
I
y
a
Io
ng them.
Swith
the
tool
from right
to
left
6
11