Filter
Top Products
.,
.
.
......
.I
.I..
Length
of
Cord (Feet)
25 50
100
AWG Size of Cord
18
18
18
ACCESSORIES
CAUTION:
These accessories or attachments are recommended for use with your
Makita
tool
specified
in
this
manual. The use of any other accessories or attachments might present
a
risk
of
injury
to
persons.
The accessories or attachments should be used only
in
the proper
and
intended manner.
150
16
-
Battery cartridge
7000
e
Battery cartridge
7033
.
Shear blade assembly
,
High capacity battery charger
Model
DC1411
-
Battery cover
-
Blade cover
I
IMPORTANT SAFETY INSTRUCTIONS
FOR
CHARGER
&
BATTERY CARTRIDGE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
SAVE THESE INSTRUCTIONS
-
This manual
contains important safety and operating instructions
for
battery charger.
Before using battery charger, read all instructions and cautionary markings on
(1)
battery charger,
(2)
battery, and
(3)
product using battery.
CAUTION
-
To
reduce
risk
of injury, charge only MAKITA rechargeable batteries
marked on the charger label. Other types
of
batteries may burst causing personal
injury and damage.
Do
not expose charger
to
rain
or
snow.
Use
of
an attachment not recommended
or
sold by the battery charger manufacturer
may result in a
risk
of
fire,
electric shock,
or
injury to persons.
To reduce
risk
of
damage to electric plug and cord, pull by plug rather than cord when
disconnecting charger.
Make sure cord
is
located
so
that it
will
not be stepped on, tripped over,
or
otherwise
subjected to damage
or
stress.
An
extension cord should not be used unless absolutely necessary.
Use
of
improper
extension cord could result in a
risk
of
fire and electric shock.
If
extension cord must
be used, make sure:
Do
not operate charger with damaged cord
or
plug
-
replace them immediately.
Do
not operate charger
if
it has received
a
sharp blow, been dropped,
or
otherwise
damaged in any way; take it to a qualified serviceman.
Do
not disassemble charger
or
battery cartridge; take it to a qualified serviceman
when service
or
repair
is
required. Incorrect reassembly may result
in
a
risk
of
elec-
tric
shock
or
fire.
To reduce
risk
of
electric shock, unplug charger from outlet before attempting any
maintenance
or
cleaning. Turning
off
controls will not reduce this
risk.
13.
If
operating time has become excessively shorter, stop operating immediately. It may
result in
a
risk
of
overheating, possible burns and even an explosion.
14.
If
electrolyte gets into your eyes, rinse them out with clear water and seek medical
attention right away. It may result in
loss
of
your eyesight.
12
5