Makita UH6310A Trimmer User Manual


 
IM
PO
RTANT
SAFETY
INSTRUCTIONS
(For
All
Tools)
WARNING
-
TO REDUCE THE RISK
OF
INJURY, BASIC
SAFETY PRECAUTIONS SHOULD BE OBSERVED. INCLUDING
THE FOLLOWING:
READ AND FOLLOW ALL INSTRUCTIONS.
1.
2.
3.
4.
5.
6.
7.
8.
9.
IO.
2
DRESS PROPERLY
-
Do not wear loose clothing or jewelry. They can be
caught
in
moving parts. Use safety glasses and nonskid footwear. Use of
sturdy gloves is recommended.
STAY ALERT
-
Watch what you are doing
-
use common sense. Do not
operate trimmer when fatigued.
DANGER
-
RISK
OF
CUT
-
KEEP
HANDS AWAY
FROM
BLADES
-
Keep both hands on handles when power is on.
Do not attempt to remove cut material nor hold material to be cut when
blades are moving. Make sure trimmer is switched off and unplugged when
clearing jammed material from blades. Do not grasp the exposed cutting
blades or cutting edges of trimmer.
CAUTION
-
Blades coast after turn off.
WARNING
-
TO REDUCE THE RISK
OF
ELECTRIC SHOCK
-
Don’t use
trimmer
in
rain,
in
wet locations, or on wet hedges of shrubbery. Use only
extension cords marked “for use with outdoor appliances” having elec-
trical rating not less than rating of trimmer. Do not use damaged extension
cords. Inspect cords periodically and replace
if
damaged.
Do
not abuse cord.
Never carry trimmer by cord. Do not yank cord to disconnect from re-
ceptacles. Keep cord away from heat, oil, and sharp edges.
KEEP CHILDREN AWAY
-
Do not permit children to contact trimmer or
extension cord. Keep children a safe distance from work area.
USE TRIMMER PROPERLY
-
Use only for trimming the type of shrub,
growth, and the like, described
in
the operating instructions. Do not abuse
trimmer. Do not cut grass and weeds
with
this trimmer.
DON’T OVERREACH
OR
STAND ON UNSTABLE SUPPORT
-
Keep good foot-
ing and balance at all times.
AVOID UNINTENTIONAL STARTING
OF
TRIMMER
-
Before plugging in
trimmer, be sure trimmer switch is off. Don‘t carry trimmer with finger on
switch.
AVOID LOCKING TRIMMER SWITCH ON
-
Never attempt to tape, wire or
fasten the switches
so
as to stay
in
the ON position.
DISCONNECT (UNPLUG) TRIMMER FROM POWER SUPPLY
-
When not
in
use. Before servicing, cleaning, and the like.