Makita UH4510A Trimmer User Manual


 
MAINTENANCE
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before attempting to perform
inspection and maintenance.
Blade maintenance
After operation, clean off the blades (both
sides) with
a
stiff brush. Then wipe the
blades with
a
cloth and coat them with
light machine oil.
After use
When storing the tool, use the convenient
hole in the bottom of the tool handle to
hang the tool on
a
wall from
a
nail or hook.
The tool will stop when the carbon brushes wear to
a
certain length. When this occurs,
both carbon brushes should be replaced.
To
maintain product SAFETY and RELlABl LITY, repairs, carbon brush inspection and
replacement, any other maintenance or adjustment should be performed by Makita
Authorized or Factory Service Centers, always using Makita replacement parts.
7