Filter
Top Products
10
• In order to prevent kickback, do not remove the bar tip or
replace the guide bar with one without a bar tip.
Loosen the screws with a screwdriver. Remove the sprocket
guard.
Loosen the hex socket head bolt with the hex wrench pro-
vided. Remove the guide bar.
Fit the saw chain over the guide bar. Notice that the cutters
must be facing the revolving (arrow) direction.
Fit the saw chain over the sprocket. Install the guide bar so
that its concave portion will contact the saw chain tension
adjusting spring.
Tighten the bolt to secure the guide bar. Install the sprocket
guard and tighten the screws to secure it.
1. Screw
2. Sprocket guard
001732
2
1
1. Hex socket head bolt
2. Hex wrench
3. Guide bar
001733
2
3
1
1. Guide bar
2. Cutter
001734
1
2
1. Sprocket
2. Saw chain tension adjusting
spring
3. Concave portion of guide bar
001735
2
1
3