Filter
Top Products
10
CONNECTION OF SWITCH CORD
–Connect the switch cords to the two cords from the engine by
inserting one into the other.
–Fix the cord connector by clamp (7).
ADJUSTMENT OF CONTROL CABLE
–Adjust the control cable by adjusting bolt so that it will have 1 to
2 mm play when the throttle lever is set to the low-speed
position by carburetor adjusting bolt. (Be careful that the cutter
blade will not turn in idling.)
Make the throttle wire and I-O switch cords go along the flexible
pipe and fix three point them on clip wire (8) tightly. If you do not
fix the throttle wire and I-O switch cords surely, there is fear that
they catch on the branch and so on it is dangerous.