Makita DCS4300 Chainsaw User Manual


 
38
EU Conformity Declaration
The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by DOLMAR GmbH, declare that the MAKITA
machines,
Type: EU prototype test certiÞ cate No.
DCS3500 (194) M6 07 06 24243 080
DCS3501 (194) M6 07 06 24243 080
DCS4300 (195) M6 07 06 24243 080
DCS4301 (195) M6 07 06 24243 080
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045 Hamburg, Germany, conforms to the basic safety and health require-
ments of the applicable EU guidelines:
EU Machinery Directive 98/37/ EG.
EU EMC Directive 2004/108/ EG.
Outdoor Noise Directive 2000/14/EG.
Starting on 29 Dec. 2009, Guideline 2006/42/EG will come into force, replacing Guideline 98/37/EG. This product meets the require-
ments of the new Guideline.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 11681-1, EN ISO
14982, CISPR 12.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise level (Lwa) is 111,7 dB(A).
The guaranteed noise level (Ld) is 113 dB(A).
The EU Type-Examination Certificate was performed by: TÜV Product Service GmbH, Zertifizierstelle, Ridlerstr. 31,
D-80339 Munich.
The technical documentation is on Þ le at DOLMAR GmbH, Jenfelder Strasse 38, Department FZ, 22045 Hamburg, Germany.
Hamburg, 8.2.2008
For DOLMAR GmbH
Tamiro Kishima Rainer Bergfeld
Managing Director Managing Director