Filter
Top Products
5
12.
Make sure cord is clear of wheel. Do not
wrap cord around your arm or wrist. If
control of tool is lost, cord may become
wrapped around you and cause personal
injury.
13.
Make sure the wheel is not contacting the
workpiece before the switch is turned on.
14.
Before using the tool on an actual work-
piece, let it run for a while. Watch for
vibration or wobbling that could indicate
poor installation or a poorly balanced
wheel.
15.
Use the specified surface of the wheel to
perform the grinding.
16.
Watch out for flying sparks. Hold the tool
so that sparks fly away from you and other
persons or flammable materials.
17.
Do not leave the tool running. Operate the
tool only when hand-held.
18.
Do not touch the workpiece immediately
after operation; it may be extremely hot
and could burn your skin.
19.
ALWAYS wear proper apparel including
long sleeve shirts, leather gloves and
shop aprons to protect skin from contact
with hot grindings.
20.
Use of this tool to grind or sand some
products, paints and wood could expose
user to dust containing hazardous sub-
stances. Use appropriate respiratory pro-
tection.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
SYMBOLS
USD201-2
The followings show the symbols used for tool.
V .......................volts
A.......................amperes
Hz .....................hertz
................alternating current
....................no load speed
....................Class II Construction
.../min................revolutions or reciprocation per
minute
n
˚