Makita 5016NB Chainsaw User Manual


 
Bucking
a
log
Bucking
is
cutting
a
log into lengths.
It
is
important to make sure your footing
is
firm and
your weight
is
evenly distributed on both feet. When possible, the log should
be
raised
and supported by the use
of
limbs, logs or chocks. Follow the simple directions for easy
cutting.
When the log
is
supported along
its
entire
length
as
shown in Fig.
19,
it
is
cut from
the
top
(overbuck).
When the
log
is
supported on one end,
as
shown in Fig.
20,
cut
1/3
the diameter
from the underside (underbuck). Then
make the finished cut
by
overbucking to
meet the first cut.
When the
log
is
supported on both ends,
as
shown in Fig.
21,
cut
1/3
of that diameter
from the top overbuck. Then make the
finished cut by underbucking the lower
2/3
to meet the first cut.
I
Cut from
top
(overbuck)
avoid cutting earth
Fig.
1
2nd
cut overbuck
(2/3 diameter)
to
meet
1st
cut
1'0
avoid Dinchina)
i
Fig.
24
1st cut overbuck
(113 diameter)
(to avoid splintering)
~-
-
2nd
cut underbuck
(2/3
diameter)
to
meet 1st cut
(to avoid pinching)
Fig.
2'
15