Makita 5016N8 Chainsaw User Manual


 
Use Of Extension Cord
If
the extension cord is intended to be used outdoors, the cord shall be marked
with the suffix W-A following the cord type designation, for example
-
SJTW-
A, to indicate
it
is acceptable for outdoor use. Use an extension cord heavy
enough to carry the current the tool
will
draw. Undersize cord will cause a drop
in line voltage resulting
in
loss
of power and over-heating. Make sure the exten-
sion cord is in good condition before using. Keep the cord away from the cut-
ting area and to position cord
so
that
it
will
not be caught on branches, and the
like, during cutting. Use the table below to determine the proper wire size re-
quired
in
the extension cord.
Ampere rating
(on
nameplate)
0
-
5.0 5.1
-
10.0
10.1
-
13.0 13.1
-
15.0
Ext.
Cord
Length
25
Ft.
50
Ft.
75
Ft.
100
Ft.
125
Ft.
150
Ft.
~ ~ ~
Contact Makita Authorized or Factory Service Center
if
a proper extension cord
cannot be found.
Wire Size (American Wire Gauge)
18 18 16 14
18 16 16 14
18 16 14 14
16 14 12 12
16 12 12 12
16 12 12
-
SAVE
THESE
INSTRUCTIONS.
5