Filter
Top Products
DEALER PREPARATION CHECK LIST
Single Deck Finishing Mower
FP-100
BEFORE DELIVERING MACHINE- The following check list should be
completed. Use the Operator’s Man-
ual as a guide.
1. Assembly completed.
2. Gearboxes filled with oil.
3. All fittings lubricated.
4. All shields in place and in good condition.
5. All fasteners torqued to specifications given in Torque Chart.
6. All decals in place and readable. (See decal page.)
7. Overall condition good (i.e. paint, welds)
8. Operators manual has been delivered to owner and he has been instructed on the
safe and proper use of the mower.
Dealer’s Signature______________________________________________________
Purchaser’s Signature___________________________________________________
THIS CHECKLIST IS TO REMAIN IN OWNER’S MANUAL
It is the responsibility of the dealer to complete the procedures listed
above before delivery of this implement to the customer.
3