Filter
Top Products
and varies from location to location. The tendency is simply a tool for projecting weather conditions
and is never to be relied upon as an accurate method to predict the weather.
Note: This is a continuation of the previous section. To enter this mode, you must begin at
Section 5.1 and proceed to this section.
Press the
menu key to enter the TENDANCY Set Mode. You can skip over any setting by selecting
the enter key.
Figure 16
1. Change Tendency. Press the up key or down key to alternate the display between SUNNY,
PARTLY CLOUDY and CLOUDY, and RAINY.
2. Pressure Threshold. Press the enter key to change the pressure threshold. The up and down
arrow and pressure tendency will be flashing. Press the up key or down key to adjust the
pressure threshold from 2.0 to 4.0 hPa/hr (the default is 2 hPa/hr).
3. Storm Threshold. Press the enter key to change the storm threshold. The up and down arrow
and pressure tendency will be flashing. Press the up key or down key to adjust the pressure
threshold from 3.0 to 9.0 hPa/hr (the default is 4 hPa/hr).
5.8 Indoor Temperature
Note: This is a continuation of the previous section. To enter this mode, you must begin at
Section 5.1 and proceed to this section.
Press the
menu key to enter the INDOOR TEMPERATURE Set Mode. You can skip over any setting
by selecting the enter key.
Figure 17
Version 1.10 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 22