Filter
Top Products
41
Powered Rakes
321-004S 6/07/06
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
SR2672 & SR2690 Skid Steer Rakes
SR2672 SR2690
Hydraulic Drive Requirements 11 GPM at 2200 psi minimum 15 GPM at 2500 psi minimum
Non-Angled Width 82” 100”
Non-Angled Working Width 72" 90”
Non-Angled Length 63” 81”
Overall Height 41” 41”
Machine Weight 930 lbs. 1200 lbs.
Direction of Travel Bi-directional
Material Control Blade 2 each - 1/2” x 5” Urethane
Spike Roller RPM 9 3/8” Dia. with 3/4” x 1 1/2” Carbide Tipped Studs
Roller Speed Variable from 180 - 260 RPM
Roller End Bearings Roller Bearings
Drive Chain #50 Double Continuous Roller Chain, High Tensile,
Enclosed in oil bath
Angle Adjustment Hydraulically controlled
18 degrees right and 22 degrees left
Angle Cylinder 2” X 8”
Depth Control 2 Each 16.5” x 6.5” Air Tires W/ sealant and 3/4” Roller bearings and Spacer height
adjustment
Skid Shoes Replaceable
Chain Case Lubrication 2 1/2 pints of 80-90 weight Gear Lube - Add gear lube until it escapes from lower plug
hole.
321-004S