Filter
Top Products
16
RTA10 & RTA15 Series Rotary Tillers 311-252M
5/05/06
Land Pride
Section 3 Adjustments
Table of Contents
Skid Shoe
Refer to Figure 3-5:
The skid shoes can be raised or lowered for the desired
tilling depth by:
1. Raise tiller off the ground and properly support.
2. Loosen pivot bolt (#1) on front of shoe.
3. Remove adjusting bolt (#2) on rear of shoe.
4. Adjust skid (#3) shoe to desired location.
5. Install adjusting bolt, and tighten both the adjusting
bolt and the pivot bolt.
IMPORTANT: Be sure both skid shoes are adjusted
the same.
Skid Shoe Adjustment
Figure 3-5
11021