Land Pride RCM5515 Brush Cutter User Manual


 
84
Rotary Cutters, Folding Deck
318-721S
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
8/06/07
318-721S
RC5515, RCM5515 RC6515 & RCM6515
RC5515 & RCM5515 RC6515 & RCM6515
Gearbox Horsepower 250 HP Splitter
210 HP Center & Wing
250 HP Splitter
210 HP Center & Wing
(Blade spindle gearboxes are built heavier)
Cutting Capacity 3 1/2” 4"
Machine Weight Single row chain guards, 6 laminated wheels, 540 CV main driveline & standard clevis hitch
5,300 lbs. Approx. 5,323 lbs. Approx.
Blade Tip Speed At 540 RPM Center Blades = 14,886 FPM Wing Blades = 14,769 FPM
At 1000 RPM Center Blades = 15,604 FPM Wing Blades = 15,741 FPM
Hitch Weight 1,860 lbs.
Hitch Type Pull Type, Self - Leveling Hitch & Clevis
Clevis Type: Standard, Up & Down Swivel
Hitch Jack Standard
Cutting Width
Overall Width
Minimum Transport Width
15’-0"
15’-8”
8’-0"
Overall Length 15’-1”
Deck Height 12”
Cutting Height 2” to 14”
Lift Hydraulics 3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics 3" x 12" hydraulic cylinders, hoses & fittings
Wing Transport Protection Wing Transport Locks
Deck Material 10 gauge Top Deck and 7 gauge Bottom Deck
Side Skirt Material Bolt-on replaceable 1/4" side
Skid Shoes Wing: Reversible & replaceable
Center Deck: 2 with optional mounting location on center deck
Blades - 6 (2 per Carrier) 1/2” x 4” Heat Treated Free Swinging Alloy Steel with up lift
Blade Overlap 6"
Blade Bolt Keyed with hardened flat washer & lock nut
Stump Jumper / Blade Holder 3/16" Round dish shaped pan, reinforced with 1" x 5" x 22 3/4" blade bar
Deck Ring Optional 1/2" x 3" fully welded
Front & Rear Guards Optional rubber, single chain or double chain
Input Driveline ASAE Category 5 Star Profile with constant velocity u-joint or conventional (non-cv) u-joint.
Wing Drivelines ASAE Category 4 star profile with
slip-clutch, or optional Cat. 5 with slip-clutch
ASAE Category 5 star profile with
slip-clutch
Wheel Options 6" x 21" Laminated Tires or 15" Rims or
24" x 7.75" x 15", Used Aircraft Tires with or without foam filling
Number of Wheels 6 - Wheel option: 4 on transport axle and one on each wing axle
8 - Wheel option: 4 on transport axle and two on each wing axle.
Transport Axle Spring-cushioned on center transport axle
optional Walking tandem
Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Min. PTO Horse Power 50
Colors Standard color: Beige; Optional colors: Green or Red