Filter
Top Products
9
Section 1: Assembly and Set-Up
10/15/07
FDR2572 & FDR2584 Grooming Mowers 310-262M
Land Pride
Table of Contents
A-Frame
Refer to Figure 1-2:
1. There are flat washers placed between the rear
braces (#1) and the rear hitch plates (#5) for
shipping.
2. Remove the flat washers and reassemble the rear
braces. Do not tighten bolt and nut at this time.
3. The lower holes of the A-Frame (#2) are bolted to the
shipping crate with lag bolts for shipping.
Hitch Braces Assembly
Figure 1-2
17365
4. Remove the lag bolts from the A-Frame.
5. Loosen the 5/8" nut (#6). This will allow the hitch to
be rotated into to position.
6. Rotate the rear hitch braces (#1) up until the lower
holes of the A-Frame (#2) line up with the top holes of
the hitch plates on the deck. Secure with the 5/8”
flange bolts (#3) and 5/8” flange nut (#4) already
mounted in the holes of the front hitch plates.
7. Tighten all hardware in the rear hitch braces and
A-Frame.