Filter
Top Products
RevisionCommentsPart DescriptionPart No.Ref.
Drawing Image Numberdwg15045
Rev. 2Replaces 802-326C & 804-015CHFS 1/2-20X1 1/4 GR5802-384C1.
Rev 1; Use up stockReplaced by 802-384CHHCS 1/2-20X1 1/4 GR5802-326C1.
Rev 1; Use up stockReplaced by 802-384CWASHER LOCK SPRING 1/2 PLT804-015C2.
Rev. 2WASHER BLADE 2ODX.56THKX.51ID804-110C3.
Rev 1; Use up stockRPBY 804-110C310-043D3.
Rev. 2 not compat. w/Rev. 1(S/N 30988+)BLADE HUB310-300D4.
Rev. 1(S/N 30987-)BLADE HUB, FD - 1 5/8310-033D4.
Rev. 3 not compat. w/Rev. 2(S/N 107301+)BLADE SPINDLE SHAFT310-361D5.
Rev. 2 not compat. w/Rev. 1(S/N 30988<->107300)RPBY 310-179A310-299D5.
Rev. 1(S/N 30987-)BLADE SPINDLE310-032D5.
Includes 5; 7 and 13BLADE SPINDLE W/KEY 1/4SQ X7/8310-179A6.
Rev. 2 not compat. w/Rev. 1(S/N 107301+)1/4 SQ. KEY X 7/8 LG172-242D7.
Rev. 1(S/N 107300-)KEY WOODRUFF 1/4 X 3/4 #806890-163C7.
AT2560 mowers & (AT2572 S/N
72225-)
B-GROOVE PULLEY 5 O.D.808-075C8.
(S/N 72226+) AT2572B-GROOVE DRIVE PULLEY 6 O.D.808-127C8.
BEARING 206822-006C9.
NUT LOCK 3/4-16 NYLOC COLLAR803-114C10.
ZERK 5/16-24 STRAIGHT #1711B800-075C11.
AT2560LUBE FITTING 4 1/2 EXTENSION310-042D12.
AT2572LUBE FITTING 3" EXTENSION310-312D12.
Rev. 2(S/N 174548+)WASHER FLAT 3/4 HARD ASTMF436804-093C13.
Rev 1; Use up stock(S/N 174547-)WASHER FLAT 3/4 SAE PLT804-025C13.
Rev. 2 not compat. w/Rev. 1(S/N 30988+)BLADE HUB- MACH.-90310-224D14.
Rev. 1(S/N 30987-)SPINDLE HUB - MACH310-036D14.
Rev. 2BEARING 6206 W/ METAL SHIELD822-161C15.
Rev 1; Use up stockBEARING 206822-006C15.
Rev. 2 not compat. w/Rev. 1(S/N 72226+ AT2572)CW SPDLE HUB ASSY 6"PULL 3"TB310-161S16.
Rev. 1(S/N 72225- AT2572)CW SPDLE HUB ASSY 5"PULL 3"TB310-132S16.
AT2560CW SPDLE HUB ASSY 5"PULL 4.5TB310-137S16.
07/23/08 AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P 33
Table of Contents Part Number Index
Section 3: Drive Land Pride
AT25 SERIES
Left and Right Spindle Hub Assembly (S/N 212180-)
Applies to AT2560, AT2572