Filter
Top Products
RevisionCommentsPart DescriptionPart No.Ref.
Drawing Image Numberdwg17278
Standard Medium LiftMWR BLD 1/4X16 7/8SD ML CCW890-326C1.
Optional High LiftMWR BLD 1/4X16 7/8SD HL CCW890-322C1.
Optional Low LiftMWR BLD 1/4X16 7/8SD LL CCW890-324C1.
Optional Mulch BladesMWR BLD MULCH 1/4X16 7/8SD CCW890-701C1.
NUT HEX 7/16-20 PLT803-115C2.
WASHER LOCK 7/16 PLT804-014C3.
NUT HEX 5/8-18 PLT803-022C4.
WASHER LOCK SPRING 5/8 PLT804-022C5.
V-BELT B93 95.75 E.L. KEVLAR816-142C6.
Includes items 25 through 34CCW TG SPNDL HUB ASSY 5" PULL310-251S7.
HHCS 7/16-20X1 1/2 GR8802-229C8.
IDLER SPACER310-051D9.
FLAT IDLE PULLEY 6 1/4 O.D.808-073C10.
HHCS 5/8-18X4 GR5802-237C11.
Includes one each of items 5; 10 &
13,15, 23, & 24 and two of item 22.
CEN-RH. IDLER TAKE-UP SUB315-143S12.
HHCS 5/8-11X1 1/2 GR5802-051C13.
NUT HEX 3/8-16 PLT803-014C14.
IDLER MOUNT BAR310-165H15.
SP EYE 3/8-16X4802-567C16.
SPRING EYE-BOLT BRACKET310-095H17.
SNAP RING EXT 7/16800-099C18.
OVER-CENTER LATCH-90310-094H19.
SPRING EXT BELT HANDLE807-068C20.
HHCS 5/8-11X1 1/2 GR5 NYL802-228C21.
NUT LOCK 5/8-11 PLT803-024C22.
IDLER LINK BAR LONG310-353D23.
IDLER LINK BAR SHORT310-354D24.
GREASE ZERK STRAIGHT 1/4-28800-001C25.
NUT HEX 3/4-16LH NYLOC COLLAR803-228C26.
1/4 SQ. KEY X 7/8 LG172-242D27.
WASHER FLAT 3/4 HARD ASTMF436804-093C28.
B-GROOVE PULLEY 5 O.D.808-075C29.
BEARING 6206 W/ METAL SHIELD822-161C30.
BLADE HUB MACHINED TOP GREASE310-457D31.
Rev. 2 not compat. w/Rev. 1(S/N 329661+)BLADE SPINDLE SHAFT CCW TG310-631D32.
(S/N 329660-)RPBY 310-350S310-455D32.
BEARING 206822-006C33.
BLADE HUB C.C.W.315-494D34.
Rev. 2 not compat. w/Rev. 1(S/N 329661+)HFS 1/2-20X2 LH GR8802-696C35.
Rev. 1(S/N 329660-)HFS 1/2-20X1 1/4 LH GR5802-447C35.
WASHER BLADE 2ODX.56THKX.51ID804-110C36.
04/02/08 AFM4011 And AFM40133 All-Flex Mower 315-470P 27
Table of Contents Part Number Index
Section 4: Decks Land Pride
Belt Drive Center (S/N 239258+)
Applies to AFM4011 and AFM40133